FUJI Solo Bag Rack 2.0

18” Width, 21.75” Height, 32” Extension

Materials: Heavy duty steel construction

Installation: Attach to wood studs or masonry walls

For best performance, Fuji recommends Hanging with a Sling Kit + Heavy Bag Spring 

SOLO BAG RACK MOUNTING:

Product Notes: Dimensions:18” Width, 21.75” Height, 32” Extension

Hardware: (not included, consult a Pro for proper selection for your wall) Mount to wood with Structural Lag Screws / Lag and Shield Anchors / or similar as specified by an experienced professional.

1. Organize your tools and supplies
2. Measure your desired mounting location on your wall. 
1. A 9ft-10ft height is recommended where possible
3. Use a Magnetic level to hold your top wall bracket in place and level at the desired height and location.  Mark your holes. 
4. Predrill 2 of your anchor holes if using concrete anchors.  Place your bracket back on the wall and secure 2 anchors.  Pilot the next 2 and install anchors while the bracket is in place so you’re certain these are in the correct location. Ensure a snug and secure hold on your wall. 
5. Pre Assemble your Extension arm and Leg support together and in line. 
6. Using 2 ladders / or similar, have 1 person hold your assembled Extension in place and against the wall.  Feed your bolts though and secure with the washer, then locknut. Use an impact driver/socket / 3/4in wrench to snug and secure your anchors.
7. Pilot and Anchor in your last two wall bolts in the leg support.  Ensure your extension is level and the weight of the extension is supported with the angle leg support. 

Install your Fuji Bag Sling Kit / Bag Chains to your desired hanging height and hang your bag!